Министерство внешних экономических
связей, инвестиций и торговли
Республики Узбекистан
РуcEng 中文

Construction materials

Portland (artificial) cement M400 D20
Clinker 74%;
Mean gypsum content 6%;
Mineral content 20%;
Package: bulk or bag of 50 kg.
 
 

Portland PC 400 - BEFORE
Material composition:
- 94% of clinker;
- Average gypsum content of 6%.
Packing: bulk or bag of 50 kg.
 
 
Sulfate-resistant Portland cement SSPTS 400 - BEFORE
Material composition:
- 94% of clinker;
- Average gypsum content of 6%.
Packing: bulk or bag of 50 kg.
 
 
 
 Portland (artificial) cement PC 500- DO
Material Structure:
- silicon oxide – 21,3%;
- aluminum oxide – 5,13%;
-  ferrous oxide – 3,56%;
- magnesium oxide -2,66%;
- sulphuric anhydride  content in cement -2,7%
-stabbing losses – 2,16%
- insoluble residue – 0,94%;
- tricalcium silicate – 61,5 %
- belit- 14,2%;
- tricalcium aluminate – 61,5%;
 - four-calcium alumoferrite -10,9%
- hexavalent chromium – is not rationed.
 
 
Spackling gypsum sateen    
Material Structure:
Alabaster binding materials
Micro-calcite G-5, G-6
Polymerous additive
Bag of 20 kg
 
 
GYPSUM PLASTER
Polymerous additive
Material Structure:
 Alabaster binding materials
Micro-calcite G-5, G-6
Polymerous additive
Bag of 20 kg
 
 
 
FACADE FILLER
Material Structure:
Portland (artificial) cement M400
arenaceous quartz,
Polymerous additive
Bag of 20kg
 
 
FACADE DECORATION PLASTER 
Material Structure:
White Portland cement M 400,
arenaceous quartz,
Polymerous additive
Bag of 20 kg
 
CEMENT FOR CERAMIC TILE
Material Structure:
Portland cement M400,
Micro-calcite, quartz
Bag of 25 kg
 
 
JOINT FILLER (grey, white) FUGA
Material structure:
Portland cement M400,
Micro-calcite, quartz
sand, polymerous additive
bag of 25 kg
 
 
NEAT CEMENT
Material Structure:
Portland cement M400,
arenaceous quartz,
polymerous additive
bag of 25 kg
 
 
PPRC pipes and fittings
Engineering data:
PN 10 – for cold water supply (up to  +20°С) and heat-insulated floors (up to +45°С), nominal operating pressure is 1 MPa (10,197 kgs/cm2);
PN 10 – for cold water supply and hot-water supply (up to +60°С), nominal operating pressure is 1,6 MPa (16,32 kgs/cm2);
PN 20 — for cold water supply (temperature up to +95°С), nominal pressure is 2 MPa (20,394 kgs/cm2);
PN 25 (reinforced) — for hot water supply and central heating (up to +95°C), nominal pressure 2,5 MPa (25,49 kgs/cm2).
 
 
Schist
Content: Thin asbestos fibres smoothly distributed in cement form reinforcing net that substantially increases its tensile strength and impact toughness. Mechanical characteristics of asbestos are determined with many  factors: asbestos content and its quality (average fibre length  and their diameter), equitability of fibres in cement, its chemical-mineral content and fineness of grinding, asbestos-cement stone density, and etc.
 
 
 
 
Building Brick
Engineering data:
Thickened, of 150 brand